Tesla Powerwall Solid white logo

Normal operation

Severity

Informational

Safe to continue?

Yes

Technician required?

Usually no

Last verified

September 2026

First safe check

No action needed.

What does Solid white logo mean?

A solid white logo indicates normal operation with no fault present. No action is required.

Which models use this code?

Verified for

Tesla Powerwall

Not yet verified for: individual model series. This code is recorded at brand level until a document confirms it per family.

When to stop troubleshooting

Stop and contact a qualified technician if the fault returns immediately, the device smells burnt, visible wiring damage exists, the enclosure is hot to the touch, or the manufacturer specifies professional service.

Can a reset clear this fault?

Documented reset behaviour: no. Use only the manufacturer-approved restart sequence for this device and never bridge or bypass a safety mechanism to clear a fault.

Related fault codes

Flashing red logoInverter fault (AFCI, GFCI or RSD)Flashing white logoIdle; entering sleep state Side LED flashing rapidlyEnabled but lost gateway communication Side LED flashing slowlySolar input below 30 V

Sources

Tesla Powerwall 3 Owner’s Manual
View
Manufacturer
Tesla Powerwall
Document version
—
Section / page
LED states
Verified
September 2026
A solid white logo indicates normal operation.

Disclaimer

EnergyFaults provides informational troubleshooting guidance. Electrical and high-voltage equipment should only be serviced by qualified professionals where required. Always follow the manufacturer documentation for your exact model.